Lime Scale Protection

The Water Guys

AQA TOTAL LIME SCALE PROTECTION

The revolution in unique protection
against lime-scale buildup --
without salt or magnets!
For residential AND industrial installations

Testing
AQA total was tested in accordance with DVGW and OVGW Guidelines (which represent the highest European Standards) and tested in extensive series of tests all over Europe. The results were so successful that performance guarantee, according to DVGW Standard W 512, can be given.

AQA total - powered by IQ Technology - is the only device that:

Lime scale remains in the water and not in the water pipes or heater
Drinking water remains drinking water with all its valuable life sustaining salts and does not add sodium to the water
Has full performance guarantee according to the highest European Guidelines (e.g., DBGW W 512)
Is practically service-free; the cartridge only needs to be replaced at long-term intervals, depending on water quality and consumption.
Is economical; low energy consumption of less than 2 Watt/gal

Excerpts of DBGW Guideline W 512

Hot water tank temperature, 176 degrees F
Duration of tests: 2 x 21 days
Quantity of water sampled: about 34 gal/day, about 720 gal/test
Test water hardness: about 25 grains/gal
The cold test water must have a minimum calciumcarbonate precipitation potential (CCPP) of 30 ppm CaCo3.

A device has passed the test if the lime-scale outcome is 80% less on the coil. Our unit's performance was 95%.

How AQA total - powered by IQ -Works
The active part of IQ consists of a three-dimensional electrode, which is formed from electrically conductive and nonconductive particles. The application of specific current/voltage impulses to these electrically conductive particles results in a local displacement of the hardness carbon dioxide equilibrium. The height and width of the impulses depend on the present composition of the water and the flow rate.

As a result of the local displacement of the hardness carbon dioxide equilibrium, tiny calcium carbonate crystals, the so-called nanocrystals, are formed in the active part of IQ. Because of the small size of the nanocrystals, they carry an electrical load that prevents coalescience. The nanocrystals in their entirety are able to trap the hardness in the water, which prevents lime scale build-up in pipes and water heaters. The result -- hardness stays in the water and not as deposit in pipes and water heaters. Lime scale deposits, which can form through evaporation of water (e.g., on showerheads, fittings, and shower partitions) can be easily wiped away.

With AQA total - powered by IQ,
the lime-scale problem is finally solved!

AmeriPure Water Co.
8301 Melrose Drive
Lenexa, Kansas 66214
United States
Phone: 913-825-6600
Fax: 913-307-0112
ameripurewater@gmail.com